PET Pre-Coating Film
Detail Description
Specifications:
1) Thickness:
Glossy:
25mic=12mic BOPP film +13mic glue
27mic=15mic BOPP film+12mic glue
30mic=18mic BOPP film+12mic glue
Matte
27mic=15mic BOPP+12mic glue
30mic=18mic BOPP+12mic glue
2) Width: 360; 390; 440; 540; 590; 780;880; 1080; 1320; 1400; 1520 (with 5mm tolerance) (it is upon customersrequirements)
3) Connector: less than 2
4) Length: 100m - 3,000m with 10% tolerance
5) Paper core: 1 inch (25.4mm); 2 inch(50.8mm); 3 inch (76mm)
Applications:
1) coating on books and magazines;catalogs; pictures; promotional materials; non-drying adhesive; paper bag;clothes lag;
2) Blueprint document; outdooradvertisement; spray paintings; post; digital print
3) Wedding photograph; photo album
4) outside coating for wrapping box forfood; medicine; cosmetic; gift; liquor; etc
Environmentally friendly: It isenvironmentally friendly,nonhazadous to health and safe to use as no toxicgases or volatile content is emitted.Safety in laminating process as no solventbased adhesive is used.
High function: Compared with other solventlamination,our film is better in clarity and bonding.Strong ability ofabsorbing powder.It prevents lamination from being pressed,bubbled and shreddedoff easily.Matt thermal lamination film is good for spot UV and hot stamping.
Easy handing: It is easy to operate oncethe required temperature is met and no special technique required.
Efficient and energy-saving: Productioncost is reduced substantially as there is no film wastage,mixture of adhesivesolvent,and no UV heating lamp is reqired.
Adaptable to different kinds of machines:This film is recommended to be used in dry laminator.Small adjustments need tobe made to the machine if the film is used in wet laminator.
Process Parameter: Equipment for laminatingfilm:dry and wet film laminator
Temperature: Normal:85~100°C
Special:100~110 °C
Roller pressure:8~15Mpa
Speed:8~50m/min
Remarks:Special laminations refer to thosewith thicker ink,solid color,high moisture content and bigger size paper.
Using parameters:
Laminating device :dry,wet laminatingmachine
Hot solls temperature:general print:85-100℃
Special printing:100-110℃
Compression:8-15Mpa
Degree:8-20m/min
Note:for special printing ink layerthickness,refers to the color depth,water and paper quantitatively big print.
Use Guidelines:
1. Adjust roller pressure and temperatureaccording to different types of paper and ink.
2. When using the film for the first timeor changing to other sizes,we recommend a small trial volume before going intofully mass lamination.
The following situation will affect thequality of the film during lamination.
1. When using metal ink.
2. When the ink contains too much wax,driedoil,adhesive,and silicon additive.etc.
3. When the ink is too thick.
4. When the ink is not completely dry.
5.When the paper contains to much moisture.
When there is too much powder.
